Petroleum Terminal Handling and Diesel Exhaust Fluid

EATONAerospace Group TF100-125C June 2013 3 Option Description Option Description B Adds folding handle to lower half W Adds carriage assembly (60532) C Adds product selection (41802) X Adds safety clip to QD (220822) — with Option 2 (Part 2) only D Adds lockwire to coupler joint fasteners Y Adds handle assembly at outlet (47182) F Adds male dry break QD for the fuel control port. Use with Option E. Z Adds vertical carrying handle, replacing standard handle Part 2 One or more of the options shown in the table (right) must be added to the basic model number 64802 to obtain desired features. 64802 Part 1 - Model number Part 2 — Various options to provide desired features to the coupler Part 3 — Describes the various configurations of the male adapter on the outlet of the pressure control elbow Part 4 — Designates the outlet thread size and type Various options are available on Model 64802. The part number system is as shown, right. The complete part number is comprised of four parts, as explained in the tables below. Ordering Data Option Description Option Description 2 Male adapter fitting to mate standard thumb latched female QD 4 Adds adapter to mate customer furnished Model 60600 (except Option K) type QD 3 Male adapter fitting to mate Model 64702/60700-1 style female QD Part 3 One of the options shown in the table (right) must be added to determine the outlet male adapter configuration. Option Description Option Description H 2½-inch NPT outlet — applicable with Options 2 and 3 (Part 3) P 4-inch NPT outlet — applicable with Options 3 and 4 (Part 3) K 2½-inch BSPP outlet — applicable with Options 2 and 3 (Part 3) Q 2-inch NPT outlet — applicable with Options 2 and 3 (Part 3) L 3-inch NPT outlet — applicable with Options 3 and 4 (Part 3) R 4-inch NPSC outlet — applicable only with Option 3 (Part 3) M 3-inch BSPP outlet — applicable with Options 3 and 4 (Part 3) S 2-inch BSPP outlet — applicable with Options 2 and 3 (Part 3) N 4-inch BSPP outlet — applicable with Options 3 and 4 (Part 3) Notes: 1. Part 4 can be left blank when ordering a coupler to be used as a replacement for an existing Model 60700-1, 60600, 60600-1 or 64702 coupler. Part 3 must be filled in properly to acquire a male half to mate the existing female half being used. 2. Part 4 may also be left blank if a Model 64802 coupler is being ordered as a replacement or a spare that will be used with an existing female half (attached to the hose) Examples: 64802FX2H Coupler with folding handle, dry break fitting in command port, collar stop assembly, safety clip on QD, standard thumb latch QD with 2½-inch NPT threads 64802FW3 Coupler with dry break fitting in command port, collar stop assembly, carriage assembly and outlet adapter to mate an existing female adapter previously used on Model 60700-1 Part 4 One of the options shown in the table (right) must be added to Option 3, above, to specify the outlet thread size and type. See notes below regarding exceptions.

RkJQdWJsaXNoZXIy NDE1MjE4