Ballast (adjacent to tanks) Crude oil washing Deck hot air drying (cargo tanks) Petroleum cargo lines Portable discharge lines Sounding tubes/vent cargo piping Stripping lines Performance Bondstrand Series 7000M fiberglass pipe, fittings and flanges incorporate highstrength conductive filaments (U.S. Patent No. 4,330,811) to prevent accumulation of potentially dangerous levels of static electrical charges by the flow of liquids such as refined petroleum products. Series 7000M piping systems are made electrically conductive by using a conductive Ameron adhesive (U.S. Patent No. 4,874,548) in the adhesive-bonded joint and for mounting flanges. Accumulated charges are harmlessly drained from the fiberglass pipe system into the metallic structure of the ship by means of stainless steel cables embedded in fiberglass grounding saddles. The saddles are adhesive bonded in the field by the installer to the external wall of the pipe. Series 7000M fiberglass piping meets all applicable requirements of ASTM F1173. Pipe and fittings are available for continuous operating pressures of 150 psi (10 bar) or 225 psi (16 bar) at 200°F. Minimum collapse pressure of pipe and fittings is not less than 125 psi at 200°F (8.6 bar at 93°C) to withstand external pressure at bottom of filled cargo or ballast tanks under full vacuum. Listings and approvals American Bureau of Shipping (U.S.) Bureau Veritas (France) Canadian Coast Guard Det norske Veritas Dutch Scheepvaartinspectie Germanischer Lloyd Lloyd’s Register of Shipping (U.K.) Nippon Kaiji Kyokai Polski Rejestr Statków Registro Italiano Navale United States Coast Guard Russian Register of Shipping Bondstrand® Product Data Bondstrand Series 7000M Fiberglass Pipe and Fittings for shipboard and offshore platform service Uses and applications FP195C (11/99) Nominal Pipe Size Length ( in) ( mm) ( ft) ( m) 1 - 11⁄2 25 - 40 10* 3.0 2 - 8 50 - 200 30* 9.1 10 - 16 250 - 400 20* 6.1 18 - 40 450 - 1000 40 12.2 * In U.S. Other lengths may be available outside of U.S. Pipe lengths Bondstrand marine pipe is produced in different lengths depending on pipe diameter and the location of manufacture. Pipe can be cut to specified lengths at the factory. Consult your Ameron representative.
RkJQdWJsaXNoZXIy NDE1MjE4