187 PIPING & CONTAINMENT UPP Piping Advantages • UL971 approved for all four test fuel categories including: • Motor vehicle fuels typically found in consumer dispensing facilities like gasoline or diesel including blended fuels with maximum 15% MTBE, 15% Methanol or 30% Ethanol. • Concentrated fuels such as alternate un-blended fuels containing up to 100% concentrations of Toluene, Methanol or Ethanol. • High blend fuels with higher than normal gasoline blends with maximum 50% Methanol or 50% Ethanol. • Aviation and marine specialty fuels containing up to 100% kerosene or leaded gasoline. • Uses highly efficient electrofusion welding system which connects the pipe and fittings to create a seamless direct burial pipework system. • Can be installed with a duct. • Flexible enough to coil and bend like flexible pipe but rigid enough to be used in place of fiberglass pipe for vapor recovery. • CARB approved for vapor recovery applications. Model Description Unit 001.063.050.028 PS 1 1/2" double wall pipe 28' stick 001.063.050.033 PS 33' stick 001.063.050.165 PS 165' coil 001.075.063.028 PS 2" double wall pipe 28' stick 001.075.063.033 PS 33' stick 001.075.063.038 PS 38' stick 001.075.063.100 PS 100' coil 001.075.063.165 PS 165' coil 001.063.019 V 2" single wall pipe 19' stick 001.110.090.019 PS 3" double wall pipe 19' stick 001.110.090.038 PS* 38' stick 001.090.019 V 3" single wall pipe 19' stick 001.090.038 V* 38' stick 001.125.110.019 PS 4" double wall pipe 19' stick SingleWall and DoubleWall Pipe UPP Piping UPP double wall piping provides a direct bury or retrofit solution for product, vapor and vent piping applications which require secondary containment protection. UPP double wall pipe is composed of an HDPE primary pipe with nylon fuel barrier lining enclosed within a largerdiameter ribbed HDPE secondary pipe with nylon fuel barrier lining. UPP single wall pipe is composed of an HDPE pipe with a nylon fuel barrier lining and is ideal for vent and vapor applications.This semi-rigid pipe system is flexible enough to bend on site without the need for elbow joints but is also rigid enough to be CARB certified for vapor recovery applications. The outer HDPE construction of UPP pipe allows all connections to be joined using the electrofusion welding process; providing a solid, single continuous system of pipework from the underground tank sump to the dispenser sump. UPP piping is available in both stick lengths and coils. Model Description 00-110-050- DUCT 4" UPP flexible ducting (165’ coil) 4" Ducting * Please contact customer service for lead times and product availability.
RkJQdWJsaXNoZXIy NDE1MjE4