EATONAerospace Group TF100-114C May 2013 3 Option Description Option Description C Adds product selection (41802) W Adds carriage assembly (60532) D Adds lockwire to coupler joint fasteners X Adds safety clip to QD (220822) — with Option 2 (part 2), only E Adds female dry break coupling for use on sense hose (54245K52). Use with Option F. Y Adds handle assembly at outlet (47182) F Adds male dry break QD for the fuel control port. Use with Option E Part 2 One or more of the options shown in the table (right) must be added to the basic model number 64804 to obtain desired features. 64804 Part 1 - Model number Part 2 — Various options to provide desired features to the coupler Part 3 — Describes the various configurations of the male adapter on the outlet of the pressure control elbow Part 4 — Designates the outlet thread size and type Various options are available on Model 64804. The part number system is as shown to the right. The complete part number is comprised of four parts, as explained in the tables below. Ordering Data Option Description Option Description 2 Male adapter fitting to mate standard thumb latched female QD 4 Adds adapter to mate customer furnished Model 60600 (except Option K) type QD 3 Male adapter fitting to mate Model 64702/60700-1 female QD Part 3 One of the options shown in the table (right) must be added to determine the outlet male adapter configuration. Option Description Option Description H 2½-inch NPT outlet — applicable with Options 2 and 3 (Part 3) P 4-inch NPT outlet — applicable with Options 3 and 4 (Part 3) K 2½-inch BSPP outlet — applicable with Options 2 and 3 (Part 3) Q 2-inch NPT outlet — applicable with Options 2 and 3 (Part 3) L 3-inch NPT outlet — applicable with Options 3 and 4 (Part 3) R 4-inch NPSC outlet — applicable only with Option 3 (Part 3) M 3-inch BSPP outlet — applicable with Options 3 and 4 (Part 3) S 2-inch BSPP outlet — applicable with Options 2 and 3 (Part 3) N 4-inch BSPP outlet — applicable with Options 3 and 4 (Part 3) Notes: 1. Part 4 can be left blank when ordering a coupler to be used as a replacement for an existing Model 60700-1, 60600, 60600-1 or 64702 coupler. Part 3 must be filled in properly to acquire a male half to mate the existing female half being used. 2. Part 4 may also be left blank if a Model 64804 coupler is being ordered as a replacement or a spare that will be used with an existing female half (attached to the hose) Examples: 64804FX2H Coupler with folding handle, dry break fitting in command port, collar stop assembly, safety clip on QD, standard thumb latch QD with 2½-inch NPT threads 64804FW3 Coupler with dry break fitting in command port, collar stop assembly, carriage assembly and outlet adapter to mate an existing female adapter previously used on Model 60700-1 Part 4 One of the options shown in the table (right) must be added to Option 3, above, to specify the outlet thread size and type. See Notes for exceptions.
RkJQdWJsaXNoZXIy NDE1MjE4