Retail Petroleum Equipment

BENEFITS ■ PetroClear models 40502P, 40505P, 40510P and 40530P are particu- late removing spin-on filters designed to remove particulate from NEAT GASOLINE, Ethanol blended gasolines, diesels, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. ■ PetroClear models 40502P, 40505P, 40510P and 40530P are particulate spin-on filters. These filters are designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR PHASE SEPARATION IN ETHANOL BLENDED GASOLINES TO SLOW FLOW. ■ PetroClear model 40502P filter offers efficient 2 micron nominal particulate removal (nominal = 75% efficiency). ■ PetroClear model 40505P filter offers efficient 5 micron nominal particulate removal (nominal = 75% efficiency). ■ PetroClear model 40510P filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency). ■ PetroClear model 40530P filter offers efficient 30 micron nominal particulate removal (nominal = 75% efficiency). ■ UL recognized for Ethanol blended fuels, NEAT GASOLINE and diesel fuels. ■ Compatible with NEAT gasoline Ethanol blended fuels and all diesels including Biodiesels. 405 SERIES PARTICULATE REMOVING 40502 P, 40505P, 40510 P and 40530P FOR FUEL DISPENSERS SPECIFICATIONS ■ The PetroClear model 40502P utilizes a 2 micron cellulose media to remove particulate from gasolines and diesel fuels including all Ethanol blended gasolines, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 2 micron in size ( and approximately 100% of larger particulate). ■ The PetroClear model 40505P utilizes a 5 micron cellulose media to remove particulate from gasolines and diesel fuels including all Ethanol blended gasolines, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 5 micron in size ( and approximately 100% of larger particulate). ■ The PetroClear model 40510P utilizes a 10 micron cellulose media to remove particulate from gasolines and diesel fuels including all Ethanol blended gasolines, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 10 micron in size (and approximately 100% of larger particulate). ■ The PetroClear model 40530P utilizes a 30 micron cellulose media to remove particulate from gasolines and diesel fuels including all Ethanol blended gasolines, Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 30 micron in size (and approximately 100% of larger particulate). ■ The maximum flow rate for PetroClear models 40502P, 40505P, 40510P and 40530P is 20 gpm (76 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C). ■ PetroClear models 40502P, 40505P, 40510P and 40530P utilize a standard 1"-12 UNF mounting thread ref. (3/4" flow) required for most spin-on filter adaptors used in aftermarket. ■ Models 40502P, 40505P, 40510P and 40530P utilize an epoxy coated interior shell to eliminate oxidation (rusting) which can cause pinhole leaks from the inside of the filter shell. ■ Adaptors are available for models 40502P, 40505P, 40510P and 40530P in aluminum and cast iron.These single adaptors are available in 3/4" and 1" NPT or BSP inlet/outlet threads. 02-10 PC-405-P NOTE: If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc. PetroClear FILTERS ARE NOT TO BE USED INAVIATION FUEL APPLICATIONS. For disposal information please contact your nearest EPA office.