Retail Petroleum Equipment

BENEFITS ■ PetroClear models 40510WA and 40530WA are particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from NEAT GASOLINE, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), kerosene and fuel oils. ■ PetroClear models 40510WA and 40530WA are particulate and water sensing spin-on filters. These filters are designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in NEAT GASOLINE. THIS FILTER WILL NOT DETECT OR REACT TO WATER IN ETHANOL BLENDED GASOLINE. ( A reaction known as phase separation) ■ PetroClear model 40510WA filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water in NEAT GASOLINE and diesel fuels. ■ PetroClear model 40530WA filter offers efficient 30 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water in NEAT GASOLINE and diesel fuels. ■ Will not detect phase separation in Ethanol blended fuels. ■ Compatible with Biodiesel fuels. ■ The water-sensing filter is not a fool-proof mechanical positive shut-off. If this filter remains in service after going into slow flow it can return to full flow, allowing contaminated fuel to be dispensed into the consumer’s vehicle and cause potential damage. 405 SERIES AGRICULTURAL PARTICULATE REMOVING & WATER SENSING 40510 WA and 40530WA Water Sensing Agricultural WATER SENSING IN NEAT GASOLINE AND DIESEL SPECIFICATIONS ■ The PetroClear model 40510WA utilizes a 10 micron cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 10 micron in size ( and approximately 100% of larger particulate). It utilizes a super absorbent media that is laminated to the filter media for water sensing capabilities in NEAT GASOLINE and diesel fuels. ■ The PetroClear model 40530WA utilizes a 30 micron cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 30 micron in size ( and approximately 100% of larger particulate). It utilizes a super absorbent media that is laminated to the filter media for water sensing capabilities in NEAT GASOLINE and diesel fuels. ■ Once PetroClear models 40510WA and 40530WA have absorbed 5.9 ounces (175 mil) of water in neat gasoline or diesel fuels, flow will be slow and will be noticeable. ■ The maximum flow rate for PetroClear models 40510WA and 40530WA is 20 gpm (76 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250°F (139°C). ■ PetroClear models 40510WA and 40530WA utilize a standard 1-3/8" – 12 UNF mounting thread ref. (1" flow ) required for most spin-on filter adaptors used in agricultural applications. ■ PetroClear models 40510WA and 40530WA utilize an epoxy coated interior shell to eliminate oxidation (rusting) that can cause pinhole leaks from the inside of the filter shell. ■ Adaptors are available for models 40510WA and 40530WA in cast iron.This adaptor is available in 1" NPT inlet/outlet threads. For disposal information please contact your nearest EPA office. 02-10 PC-405WA+P NOTE: If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc. PetroClear FILTERS ARE NOT TO BE USED INAVIATION FUEL APPLICATIONS.