Retail Petroleum Equipment

BENEFITS ■ PetroClear model 50710P is a particulate removing spin-on filter designed for use on fuel and hydraulic suction and return line applications. ■ PetroClear model 50710P is a particulate spin-on filter. It’s designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINE. ■ PetroClear model 50710P filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency). ■ Compatible with NEAT GASOLINE, Biodiesel and Ethanol blended fuels. 507 SERIES PARTICULATE REMOVING 50710 P For Fuel and Hydraulic Applications SPECIFICATIONS ■ The PetroClear model 50710P utilizes a 10 micron cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel) and most hydraulic fluids. Removes a minimum of 75% of particulate 10 micron in size (and approximately 100% of larger particulate). ■ The maximum flow rate for PetroClear model 50710P is 40 gpm (151 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar). ■ PetroClear model 50710P utilizes a standard 1-1/2"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adaptors used in aftermarket and/or high-flow applications. ■ Adaptors are available for model 50710P in aluminum.This adaptor is available in both NPT or BSP inlet/outlet threads. Inlet/outlet sizes are available in 1" and 1-1/2" single adaptors.This adaptor is also available in a dual style with both 1-1/2" and 2" inlet/outlet (2"– 4" bolt SAE flange combination). ■ Each filter is packaged with a separate gasket that will fit most standard brands of adaptor filter mounting bases. Install gasket in adaptor’s groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter! ■ If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve. For disposal information please contact your nearest EPA office. 02-10 PC-507P NOTE: If you experience frequent filter changes, it is recommended that you have fuel samples analyzed to determine the source of contamination, such as water, dirt, rust, bacteria, phase separation, etc. PetroClear FILTERS ARE NOT TO BE USED INAVIATION FUEL APPLICATIONS.