Retail Petroleum Equipment

Mechanical Fleet Bid Spec SP-7180 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 1 Bid Specification – Gasboy Atlas Mechanical Fleet Products 1. Product 1.1. Fleet non computing – Mechanical register 2. Type 2.1. Pump – integrated suction pump and motor 2.2. Dispenser (“X”) – for use with remote pumping unit 3. Flowrate – capable of delivery in typical installations 3.1. Standard Flow = 15 gpm / 57 lpm 3.2. High Flow = 22 gpm / 83 lpm 4. Models 4.1. Single product single hose – one product unit with a single hose 4.2. Single product twin hose (TW1) – one product unit with two hoses 4.3. Two product twin hose (TW2) – two product unit with one hose per product (two hoses total) 4.4. Single product twin hose High Flow suction pump (TW1M) – one product with two hoses and dedicated pump/motor per hose. 5. Hardware Requirements 5.1. Display 5.1.1. Mechanical Fleet: Veeder-Root® mechanical registers (VR10) with power reset interlock. Displays on both sides include gallons or liters to 999.9 units. Includes non-resettable mechanical totalizer. 5.2. Reset (Mechanical register models only) 5.2.1. Power Reset (standard) – motor driven mechanical register reset 5.2.2. Manual Reset (optional) – spring loaded mechanical register reset 5.3. Meter 5.3.1. Four-piston, positive displacement flow-through CFT meter bolsters resistance to fuel contamination with self-cleaning central chamber 5.4. Pump with air separator (Pump models only) 5.4.1. Standard and High Flow Pumps: Rotary 10 vane pump with an air eliminator and self-priming built into pump casting. Belt driven. Pumps include check valve and field replaceable shaft seal. Ten (10) vanes provide quieter operation and better suction lift. 5.4.2. TW1M: Two (2) rotary 10 vane pumps per hose position with an air eliminator and self-priming built into pump casting. Belt driven. Ten (10) vanes provide quieter operation and better suction lift. 5.5. Motor (Pump models only) 5.5.1. 1 Hp continuous duty explosion proof enclosed motor on Standard, and High Flow pump models (115V or 230 V). Two (2) motors provided on TW1M. 5.6. Filter 5.6.1. Internal Filter: Spin on filter canister located before meter and valve to ensure product purity and protect critical components from contamination. Available in 10-micron or 30-micron particulate or water alert filtration with 1-1/2” opening. One filter provided per hose position on standard and high flow models. Available on Standard and High Flow Models. 5.6.2. Internal Strainer: 80-mesh removable strainer included in filter adapter housing. One strainer per hose position for standard and high flow. 5.7. Valves 5.7.1. Standard & High-Flow (9152/9153): 1” solenoid valve that may be cleaned or replaced without breaking down pipe work – standard on dispensers and pumps. 5.8. Piping 5.8.1. Standard & High Flow: 1” brazed copper feedline and 1” black iron threaded discharge pipe. 5.9. Junction Box 5.9.1. Explosion-proof field wiring junction box for AC wiring. Includes two 1” NPT field wiring openings and one ¾” NPT opening for DC control interface wiring. 5.10. Totalizer 5.10.1. Totalizer – (Mechanical Type). Mechanical non-resettable totalizer. Located on back panel. Reads up to 9,999,999.9. Required for resale applications. 5.11. Hose Retriever