Retail Petroleum Equipment

THE EDGE ™ LED Area Light – Type III Medium Rev. Date: 12/11/09 General Description Slim, low profile design minimizes wind load requirements. Fixture sides are rugged cast aluminum with integral, weather-tight LED driver compartments and high performance aluminum heatsinks. Convenient, interlocking mounting method. Mounting housing is rugged die cast aluminum and mounts to 3 – 6" square or round pole. Fixture is secured by two (2) 5/16-18 UNC bolts spaced on 2" centers. Includes leaf/debris guard. Five year limited warranty on fixture. Electrical Modular design accommodates varied lighting output from high power, white, 6000K ( +/- 500K per full fixture), minimum 70 CRI, long life LED sources. 120–277V 50/60 Hz, Class 1 LED drivers are standard. 347–480V 50/60 Hz driver is optional. LED drivers have power factor >90% and THD <20% of full load. Units provided with integral 9kV surge suppression protection standard. Integral weather-tight electrical box with terminal strip for easy power hook-up. Surge protection tested in accordance with IEEE C62.41.2 and ANSI standard 62.41.2. Testing & Compliance UL listed in the U.S. and Canada for wet locations. Consult factory for CE Certified products. RoHS compliant. International Dark-Sky Association approved. Finish Exclusive Colorfast DeltaGuard ® finish features an E-Coat epoxy primer with an ultra- durable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Bronze, black, white and platinum bronze powder topcoats are also available. The finish is covered by our 10 year limited warranty. Fixture and finish are endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117. Patents U.S. and international patents granted and pending. BetaLED is a division of Ruud Lighting, Inc. For a listing of Ruud Lighting, Inc. patents, visit www.uspto.gov. Field-Installed Accessories Bird Spikes XA-BRDSPK THE EDGE ™ EPA & Weight Calculations Approximate # of Weight 2@ 2@ 3@ 4@ LEDs 120-277V 1 Single 180º 90 º 90 90 º Fixed Arm Mount 20 21.0 lbs. 0.60 1.20 0.87 1.47 1.75 40 23.7 lbs. 0.60 1.20 0.87 1.47 1.75 60 27.0 lbs. 0.60 1.20 0.92 1.51 1.83 80 28.1 lbs. 0.60 1.20 0.96 1.55 1.91 100 32.3 lbs. 0.60 1.20 1.00 1.60 2.00 120 33.5 lbs. 0.60 1.20 1.04 1.64 2.08 140 36.9 lbs. 0.60 1.20 1.08 1.68 2.16 160 41.4 lbs. 0.60 1.20 1.12 1.72 2.24 180 42.1 lbs. 0.60 1.20 n/a 2 n/a 2 n/a 2 200 43.3 lbs. 0.61 1.21 n/a 2 n/a 2 n/a 2 220 46.6 lbs. 0.65 1.29 n/a 2 n/a 2 n/a 2 240 47.8 lbs. 0.69 1.38 n/a 2 n/a 2 n/a 2 1. Add 5 lbs. for transformer in 347-480V fixtures 2. For applications requiring 180 or more LEDs at 90 degrees refer to the DL mount version of our spec sheet. Photometrics Isofootcandle plot of 6000K, 120 LED Type III Medium area luminaire at 25' A.F.G. Luminaire with 9,893 initial delivered lumens operating at 350mA. Initial FC at grade. 80' 20' 20' 40' 6.1 0 m 6.1 12.2 40' 60' 20' 0' 20' 40' 60' 12.2 18.3 6.1 0 m 6.1 12.2 18.3 80' 24.4 24.4 0' .5 15 º .2 .1 CURB LINE 40' 12.2 30.5 30.5 100' 100' 18.3 18.3 24.4 60' 80' 60' 1 Position of vertical plane of maximum candlepower. 80' 80' 20' 20' 40' 6.1 0 m 6.1 12.2 40' 60' 20' 0' 20' 40' 60' 12.2 18.3 6.1 0 m 6.1 12.2 18.3 80' 24.4 24.4 24.4 0' .5 .2 .1 CURB LINE 30.5 30.5 100' 100' 18.3 60' 1 Isofootcandle plot of 6000K, 120 LED Type III Medium area luminaire with backlight control at 25' A.F.G. Luminaire with 7,419 initial delivered lumens operating at 350mA. Initial FC at grade. Independent Testing Laboratories certified test. Report No. ITL63574. Candlepower trace of 6000K, 120 LED Type III Medium area luminaire with 9,914 initial delivered lumens operating at 350mA. All published luminaire photometric testing performed to IESNA LM-79-08 standards. 150 ° 120 ° 120 ° 60 ° 90 ° 90 ° 60 ° 30 ° 4839 1210 3629 2420 150 ° Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. 10 90 º 90 º 120 º 120 º 150 º 150 º 60 º 60 º 30 º 19 29 39 Candlepower Trace: Vertical plane through horizontal angle of maximum candlepower. PRELIMINARY Candlepower trace of Type III Medium LED luminaire with backlight control. ARE-EDG-3M-DA © 2009 BetaLED ® , a division of Ruud Lighting • 1200 92nd Street • Sturtevant, WI 53177 • 800-236-6800 • www.betaLED.com Made in the U.S.A. of U.S. and imported parts. Meets Buy American requirements within the ARRA.