Retail Petroleum Equipment

Fleet Management Bid Specification SP-7178 01/12 Gasboy│7300 W Friendly Ave│Greensboro, NC 27410 4  Secured remote capabilities for monitoring, management and maintenance activities  Flexible with all types of communication including TCP/IP, wireless Ethernet bridge modems, satellite communications, and dial-up analog modem.  Web enabled reporting and alarms for Tank Level Sensing (TLS) systems (Veeder Root-350 and VR-450 protocols)  Fuel management software for reconciliation reports  Accessible via Internet browser to control and monitor the system. No requirement to install dedicated software.  Real time web-based dynamic graphical monitoring and control of dispensers  Remotely open a pump and limit the quantity to a specific transaction  Able to update fuel price at a specific time  Remote maintenance, remote troubleshoot and remote software upgrades of the various components of the system The following physical, electrical and environmental specifications shall be provided:  Supply voltage: 100 – 240 VAC  Power consumption: 2A max.  Operating temperature: -22 F to +158 F (-30 C to +70 C)  Communication interface: RS-485–9600 bps, Half-Duplex, RS-232, Ethernet RJ-45-10 Mbps, EIA 802.15.4 4.2 Tank Level Sensing (TLS) Interface The site controller shall support Veeder Root TLS 350 and Veeder Root TLS 450 protocols The TLS will be connected to the site controller via TCP/IP communication port or the RS-232 port to allow fuel management capabilities The site controller shall have the possibility to define the following communication parameters; Baud rate, Parity, Data bit, Stop bit, Flow control The site controller shall collect the following data from TLS equipment:  12:00 midnight shift inventory volume for tanks  Tank inventory level ; CSLD (Leak Detection) status – Pass/Fail  Fuel delivery information; Water Level  Water levels, Temperature, Alarms (Leak, Overfill, Sump, Sensor, etc)  Alarms shall flash continuously on the main screen and could be sent via email 4.3 The Pedestal The pedestal shall be a slim (9.5”x9.5”x61”) powder coated metal designed for easy installation and service. The paint application for the entire pedestal terminal shall consist of a positive/negative charged ionization process for superior bonding. All materials shall be tested to sustain Oil, Fuel, Sun, Water and Salt.