3 Typical primary pipe performance Nominal Pressure Ultimate Internal Ultimate Pipe Size Rating1 Pressure1 Collapse Pressure2 (in) (mm) (psig) (MPa) (psig) (MPa) (psig) (MPa) 2 50 300 2.07 3200 22.1 153 1.05 3 80 200 1.38 2400 16.5 90 0.62 4 100 175 1.21 2000 13.8 39 0.27 1) At 150°F (66°C). 2) At 80°F (27°C). For continuous service do not exceed 75% of these values. Note: Values shown for primary only Fittings pressure performance Typical physical properties of primary pipe Nominal Primary Containment Pipe Size All Fittings Clamshell Fittings (in) (mm) (psig) (MPa) (psig) (kPa) 2 50 250 1.72 50 345 3 80 150 1.03 50 345 4 100 125 0.86 20 138 For dimensions of fittings, consult Ameron publication DUALOY 3000/L FITTINGS DIMENSIONS, FP266. Pressure ratings of fittings without UL Listing are available on request. Dualoy 3000/LCX piping systems are designed to function at temperatures ranging from -40 to 150°F (-40 to 66°C) at service pressures between -15 to 300 psi (-1 and 20 bar). Dualoy 3000/LCX pipe conforms to ASTM D2310, D2517 and D2996. Method Pipe Property1 Units Value ASTM ATM1 Thermal conductivity Btu•in/(h•ft2•°F) 1.7 C177 23 W/m•°C 7.6 Linear thermal expansion 10-6 in/in/°F 8.5 D696 21 10-6 cm/cm/°C 15.3 Friction factor Hazen-Williams 150.0 — 156 Absolute roughness 10-6 ft 50.0 — — 10-6 m 15.0 Specific gravity — 1.81 D792 Barcol Hardness Impressor 934-1 65.0 D2583 — 1) Ameron test method. Typical pipe dimensions and weights Nominal Primary Primary Wall Containment Pipe Size I.D. O.D1. Thickness O.D. Volume Weight in.• mm. in.•mm in. •mm in. •mm. in. •mm. (gal/ft •l/m) (lb/ft•kg/m) 2 50 2.21 56 2.37 60 0.080 2.03 2.59 66 0.20 .76 0.90 0.41 3 80 3.32 84 3.50 89 0.085 2.16 3.70 94 0.45 1.70 1.30 0.59 4 100 4.33 110 4.50 114 0.087 2.21 4.70 119 0.77 2.92 1.74 0.79 1 Typical outside diameters of 2- through 4-inch pipe are within API, ASTM and ANSI fiberglass and steel pipe dimensions.
RkJQdWJsaXNoZXIy NDE1MjE4