Retail Petroleum Equipment

44 FIXED LENGTH SUBMERSIBLE TURBINE PUMP SPECIFICATIONS • Fixed length, fixed speed models require single-phase, 208-230 VAC, 60 Hz incoming power. • Fixed length, fixed speed models are available in 1/3, ¾, 1½, and 2 hp versions. • Fixed length, fixed speed models incorporate a starting and running capacitor with internal bleed resistor. • A 370 Volt, 15 microfarad rated capacitor is used with 1/3, ¾, and 1½ hp fixed length, fixed speed versions. • A 370 Volt, 40 microfarad rated capacitor is used with 2 hp fixed length, fixed speed versions. • STP-SCI single-phase Smart Controllers and STP-CBS single-phase control boxes are available for fixed speed pump control. • Fixed speed, 3450 rpm, multi-stage centrifugal type pump motor with integral, automatic, thermal overload protection. • 1/3 and ¾ hp fixed speed models are available as two-stage versions. • 1½ and 2 hp fixed speed models are available in standard pressure (two-stage) versions and high pressure (H option, three-stage) versions. • Max. liquid viscosity: 70 SSU at 60 °F (15 °C). • Fixed length STP models are UL and cUL listed for fuel mixtures containing up to 10% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. • AG (alcohol-gasoline) models are UL and cUL listed for fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. • Fixed length models can also be used with diesel fuels, fuel oils, kerosene, Avgas, and jet fuels in a non-gelled pourable state. • All wetted elastomers are made of a high grade, fluorocarbon compound. • Check valve: 2¾" diameter fluorocarbon seal constructed on cast aluminum body and aluminum backing washer. • Pressure relief valve: available in four pressure relief settings, integral to check valve. Standard model relieves at 40 psi and resets above 35 psi. • Syphon: venturi-type syphon primer supplied with every submersible. Syphon check valve and secondary syphon sold separately. • Air eliminator: every submersible includes a tank return path with one-way check valve to provide active air elimination. • Electrical disconnect: electrical yoke for positive contractor disconnect during service. • Consult factory for applicable approvals. • Franklin Fueling Systems is an ISO 9001 Certified Manufacturer. A B SUBMERSIBLE TURBINE PUMPS Approvals Quality Certification Power Requirements Pump Motor Liquid Compatibility Standard Features