Veeder-Root Sensor Application Guide 6 Mag Sump Sensor The Mag Sump Sensor detects the presence and amount of water and/or fuel in the containment sump or dispenser pan. Using proven magnetostrictive technology to detect the presence of hydrocarbons and water, the station (where allowed) remains in operation when water alone is detected. An alarm is also generated if the sensor has been moved from its proper position at the bottom of the sump or pan. Sensor Detection Capabilities - Alarm Conditions Fuel Alarm - triggered when fuel reaches approximately 1.5’’ in height. Water Warning Alarm - triggered when water level reaches approximately 1.7’’ in height (or other programmable height). Installation Alarm - triggered when sensor is moved from proper operating position. Comm Alarm - triggered when there is no communication with the sensor. Operating Capabilities • Operating temperature range: -40 to +60°C. • Storage temperature range: -40 to +60°C. Sensor Models and Accessories • Mag sensor for gasoline and diesel - 22” high w/ 10 foot cable - Form Number 857080-111 • Mag sensor for gasoline and diesel (w/ leak detect capability) - 22” high w/ 10 foot cable - Form Number 857080-211 • Mag sensor for gasoline and diesel - 34” high w/ 10 foot cable - Form Number 857080-112 • Mag sensor for gasoline and diesel (w/ leak detect capability) - 34” high w/ 10 foot cable - Form Number 857080-212 • Universal Sensor Mounting Kit (optional) - P/N 330020-012 Sensor Interface Module • TLS-350R/EMC w/BIR, TLS-350 Plus/EMC Enhanced, and TLS-350/EMC - Smart Sensor interface module (P/N 329356-004) accepts up to 8 sensors (up to 64 sensors could be monitored by the console) • TLS-450 - USM (P/N 332812-001) accepts up to 16 sensors Console Software Compatibility • TLS-350 series (Version 24 or later) • TLS-450 (All) Compatible Fuels • Unleaded gasoline • Unleaded with up to 5% methanol, 15% ethanol, or 15% MTBE • Leaded gasoline • Diesel • Kerosene • Jet fuel • Aviation gasoline Related Sales Literature Visit our website at www.veeder.com for more information on Veeder-Root products and services. sensors\msdissump.eps Weatherproof junction box with 1/2-inch N.P.T. threads (16 cubic inch volume minimum). 1/2'' rigid conduit to console Seal-off Cord grip Brackets, clamp, etc., from optional Universal sensor mounting kit Dispenser containment sump U-channel Product line IMPORTANT! DO NOT MOUNT SENSOR TO FLEXIBLE PRODUCT LINE. Sensor Incorrect Correct Fig. 3 Typical Mag Sump Sensor Installation in Containment Sump
RkJQdWJsaXNoZXIy NDE1MjE4