Veeder-Root Sensor Application Guide 7 Position-Sensitive Sensor The Position-Sensitive Sensor is installed in a pan/sump and incorporates a float switch to detect water and/or hydrocarbons. The sensor also alarms if it is moved off the bottom of the pan/sump. Sensor Detection Capabilities - Alarm Conditions • Fuel alarm is triggered when liquid reaches a nominal height of 1-1/2 inches. • Sensor Out alarm is triggered when sensor is moved off bottom of the pan/sump. Operating Capabilities • Operating temperature range: 0 to +60°C. • Storage temperature range: -40 to +70°C. • Sensor dimensions: 12” high, 2.2” diameter. Sensor/Cable Length Configurations • Position-Sensitive Sensor w/ 12 foot cable - Form Number 794380-323 Sensor Interface Module • TLS-350 series consoles (except TLS-350J) - Interstitial/Liquid Sensor interface module (P/N 329358-001) accepts up to 8 sensors (a maximum of 64 sensors could be monitored by the console). • TLS-350J console - 3 sensors max. • TLS-300/PC-300 series consoles (no interface module required) - 8 sensors max. • ILS-350 console - A Two-Wire Module (P/N 329675-001) accepts up to 4 sensors (a maximum of 16 sensors could be monitored by the console). • TLS-450 - USM (P/N 332812-001) accepts up to 16 sensors Console Software Compatibility • TLS-350 series/TLS-300 consoles (Version 1 or later) • ILS-350 (All) • TLS-450 (All) Compatible Fuels • Unleaded gasoline • Unleaded with up to 5% methanol, 85% ethanol, or 15% MTBE • Leaded gasoline • Diesel • Kerosene • Jet fuel • Aviation gasoline Related Sales Literature Visit our website at www.veeder.com for more information on Veeder-Root products and services. Submersible pump Containment sump Sensor Weatherproof junction box 1/2'' Rigid conduit to console Seal-off sensors\psstpsump.eps Cord grip Product line Brackets, clamp, etc. from optional Universal sensor mounting kit IMPORTANT! DO NOT MOUNT SENSOR TO FLEXIBLE PRODUCT LINE. IMPORTANT! Housing must compress position indicator against bottom of the sump or you will have a 'Sensor Out' alarm. Incorrect Correct Fig. 4 Typical Position-Sensitive Sensor Installation
RkJQdWJsaXNoZXIy NDE1MjE4