NATIONAL TOLL FREE DIRECTORY1-866-574-5100 | ON THE WEBwww.nee.ca TYPE III HOSE ASSEMBLIES Aeroquip CR170 Type III Hose is specifically designed for use on Automotive and Forklift LPG applications and is the only hose approved for use in these applications. CGA Type III hose assemblies are built to order and tested/tagged prior to shipment. Type III hose is approved for Liquid Propane & Natural Gas Vapour and meets the requirements of CAN/CGA 8.1M86. Specifications: Inner Tube - Thermoplastic. Reinforcement - Stainless Steel braid over a textile braid. Cover - Oil Resistant Perforated Synthetic Rubber. Rated for 350 PSI at temperatures from -40° to 180° F. Hydraulically crimped non-reusable hose ends. CGA tagged with the test date. NEE # Description I.D. O.D. Weight Working Pressure Temperature Range Minimum Bend Radius HAC 6-* 3/8” hose assembly .31” .67” .26 Lbs/Ft 350 -40° to 250° F 4.0” HAC 8-* 1/2” hose assembly .41” .77” .28 Lbs/Ft 4.62” * (The last digit indicates length in feet) Note: Contact NEE with your particular overall length requirements. NH3 HOSE Goodall N2595 “Rifleman” NH3 Hose is available in bulk or pre-assembled form with various hose-end configurations. Specifications: Inner Tube - High grade low permeation butyl. Reinforcement - High tensile stainless steel with a textile breaker. Cover - Black oil, ozone and weather resistant neoprene cover. Rated for 350 PSI at temperatures from -40° to 180° F. Two piece clamp type, reusable hose ends & branded with removal date. UL approved for use with NH3. -- 8 Year Service Life NEE # I.D. O.D. Weight Working Pressure Temperature Range N259507 0.75” 1.23” .49 Lbs/Ft 350 PSI -40° to 180°F N259510 1” 1.53” .67 Lbs/Ft N259512 1.25” 1.84” .95 Lbs/Ft N259520 2” 1.73” 1.78 Lbs/Ft CLAMP HOSE END COUPLINGS Marshall Excelsior Reusable Clamp Hose End Couplings The ME3162 Series Hose Couplings are constructed of zinc plated steel or powder coated ductile iron to handle the most rugged environments. Installation is made easy due to a boss on the clamp section to keep the bolt from rotating during installation. The wide offering of sizes and configurations makes it possible to handle most applications without the addition of bulky and heavy add-ons. All clamp sections and hose barbs are made of steel and ductile iron, making them useable in both LP-Gas and NH3 applications. NEE # Coupling Style Connection Type ME3162-08 Steel Coupling 1/2” Hose Barb x 1/2” MNPT ME3162-12 3/4” Hose Barb x 3/4” MNPT ME3162-12S 3/4” Hose Barb x 1 3/4” Female ACME, Steel Nut ME3162-16 1” Hose Barb x 1” MNPT ME3162-20 1 1/4” Hose Barb x 1 1/4” MNPT NEE # Coupling Style Connection Type ME3162-2016 Steel Coupling 1-1/4” Hose Barb x 1” MNPT with 2 piece Clamp Coupling ME3162-24 1 1/2” Hose Barb x 1 1/2” MNPT ME3162-32 2” Hose Barb x 2” MNPT ME3162-32S 2” Hose Barb x 3 1/4” Female ACME, Steel Nut ME3162-32B Brass Coupling 2” Hose Barb x 3 1/4” Female ACME, Brass Nut ME3162-20 ME3162-32B ME3162-32S HOSE & TUBING
RkJQdWJsaXNoZXIy NDE1MjE4