NATIONAL TOLL FREE DIRECTORY1-866-574-5100 | ON THE WEBwww.nee.ca FLANGED BALL VALVES Velan Flanged Ball Valves Velan flanged ball valves are available in full port or standard port configurations with 300 or 150 Lbs connection ends. These valves are UL certified and tagged, Firesafe API1601 4th edition and CRN registered in all provinces. Features: RF Flanged split body design Glass reinforced PTFE seats E (TFM-1600) seats are an upgraded version Lever operated with actuator pad Cast Carbon Steel Body Memory seal seats that compensate for wear Stem Bearings to reduce side thrust Blow-out proof stem Compliance to API 607 and BS6755 Fire safe standards 300 Lb. valves are approved for pressures up to 400 psi Contact NEE for detailed specifications NEE # Description Cv Flow Rate F0810402SSEAUL 2”, Standard port, 300 Lbs Flanged 125 usgpm F1010402SSGAUL 3”, Standard port, 300 Lbs Flanged 430 usgpm F1010402SSGAUL 3”, Full port, 150 Lbs Flanged 1,020 usgpm NEE # Description Cv Flow Rate F1011402SSEAUL 3”, Full port, 300 Lbs Flanged 1,020 usgpm F1210402SSGAUL 4”, Standard port, 300 Lbs Flanged 600 usgpm F1211402SSGAUL 4”, Full port, 300 Lbs Flanged 2,000 usgpm Note: Cv Flow rate is the amount of water that will flow at 60º F with a 1 psi drop. BRASS PRECISION NEEDLE VALVES Intended for applications where precise control of gas output is required. These precision machined valves offer a wide range of adjustment without stem galling. Perfect for isolating pressure gauges from bulk storage containers or upstream shutoff valves for torches and/or outdoor burner applications. Features: • Available in brass, plated steel & stainless steel construction • Tapered valve body seat & stem for precision accuracy • Various inlet/outlet configurations available • ME831 & ME834 valves are approved for Bi-Directional Flow NEE # Description Material ME833 1/4” MNPT Outlet x 1” - 20 F.Inlet Brass ME831S 1/4” MNPT x 1/4” FNPT Plated Steel WN1532 1/4” MNPT x 1/4” FNPT (Straight Needle Valve) Stainless Steel NEE # Description Material WN1572 1/4” MNPT x 1/4” FNPT (90° Needle Valve) Stainless Steel ME831 1/4” MNPT x 1/4” FNPT Brass ME832 1/4” MNPT Outlet x #80 Orifice 1” - 20 F.Inlet SOLENOID VALVES Jefferson Solenoid Valves Typically used as an emergency isolation between the outlet of a storage tank and the inlet of a pump to allow remote shut-down of propane flow in compliance with local gas authorities in some regions. Specifications: • 2-way, normally closed, semi-direct acting piston solenoid valve • Brass, stainless-steel or carbon construction • 3/4” NPT through 3” NPT female end connections • ANSI Flanged valves available • Automatic pressure relief back to tank • Maximum operating pressure differential to 105 PSI (7.25 bar) • Vacuum applications available • Flow coefficients (CV) to 94.00 • Non-molded coil with 18” leads housed in a NEMA 7 hazardous location enclosure supplied as standard • CSA certified for both general purpose and hazardous locations NEE # Size Body Material Piston Material Seals Operation ZC1327IV302T 1/4” Stainless Steel Viton Hung Piston Z1314BV06AT-120V/60 3/4” Bronze Z1314BV08AT-120V/60 1” Z1314BV12AT-120V/60 1-1/2” Z1314BV16AT-120V/60 2” Z1314BV24AT-120V/60 3” ME831 ME832 SOLENOID & BALL VALVES
RkJQdWJsaXNoZXIy NDE1MjE4