CANADA’S LEADER IN ENERGY PRODUCTS EQUIPMENT PUMPS, COMPRESSORS & MOTORS CORKEN CORO-FLO & CORO-VANE PUMPS Corken Coro-flo regenerative turbine pumps are suited for aerosol applications, cylinder filling, auto gas, vaporizer feeds, NH3, CO2, SO2 and many other volatile liquid transfer applications. Features: Non-contact, free-floating impeller design that minimizes wear and provides extremely quiet operation. Continuous duty rated motors, fan-cooled, permanently lubricated ball bearings with no pump shaft bearings requiring lubrication. Single seal assembly that fits all models and is easily field-replaceable w/ integral motor for installation in tight locations. C Series Pumps * C Series configuration has the pump close-coupled to a motor. All CoroFlo pumps operate @ 3450 RPM. NEE # HP Phase Max PSID Capacity GPM @ 50 PSID Capacity GPM @ 75 PSID Inlet Size Outlet Size C10ED2A 3/4 1 75 6.5 2.5 1 1/2” 1” C12ED2A 1.5 85 13 9 C12FD2A 2 15 11 C13FD2A 100 22 17 C14GD2A 3 3 32 25 DS and DL Series Coro-Flo Pumps These pumps are similar to the F Series Coro-Flo pumps. However, they are built with a foot mounted C Face bracket that will allow the pumps to be C Face Mounted to various motor configurations. This will enable these pumps to meet a wider selection of application requirements, related to variations in available voltages, etc. NEE # Type Frame Size Max PSID Capacity GPM @ 50 PSID Capacity GPM @ 75 PSID Inlet Size Outlet Size DS9CD2A Bare Pump 56C - 145TC 75 4.5 with 1 HP 2.5 1 1/4 1 DS13CD2A 85 6.5 with 1 HP 11 1 1/2 DS10CD2A DS12CD2A 100 15 with 2 HP 17 DS14CD2A DL13CD2A 184TC - 215TC 31 with 3 HP 25 DL14CD2A DS / DL AUTOGAS APPLICATION GUIDE Pump Model Motor HP Motor Specifications Motor Model No Couplings Required Bypass Valve Required DS Series DS12CD2A/DS13CD2A 145 TC Frame C-Face Mount 2HP 1 Ph, 115/208-230 Volt, 143TC frame CL5031T 1ea. N095, N095-1 RO95-78 B166-.75 3 Ph, 208-230/460 Volt, 145TC frame CM7071T or VM7071T 3 Ph, 575 Volt, 145TC frame CM7071T-5 or VM7071T-5 3HP 3 Ph, 208-230/460 Volt, 145TC frame CM7075T or VM7075T 3 Ph, 575 Volt, 145TC frame CM7075T-5 or VM7075T-5 DL Series DL13CD2A/DL14CD2A 182 TC Frame C-Face Mount 3 HP 1 Ph, 115/208-230 Volt, 184TC frame CL5028T 1ea. N095, N095-1 RO95-118 B166-.75 or B166-1 w/ DL14CD2A 3 Ph, 208-230/460 Volt, 182TC frame VM7026T or CM7026T 3 Ph, 575 Volt, 182TC frame VM7026T-5 or CM7026T-5 5 HP 3 Ph, 208-230/460 Volt, 184TC frame CM7072T or VM7072T 1ea. N095, ML100-1 ML100-118 3 Ph, 575 Volt, 184TC frame CM7072T-5 or VM7072T-5 LF150 182TC to 213 TC C-Face Mount 3-10HP 5 HP 3 Ph, 208-230/460 Volt, 184TC frame CM7072T or VM7072T 1ea. N095, ML100-1 ML100-118 B166-1 3 Ph, 575 Volt, 184TC frame CM7072T-5 or VM7072T-5 7.5 HP 3 Ph, 208-230/460 Volt, 184TC frame CM7073T 3 Ph, 575 Volt, 184TC frame CM7073T-5 10 HP 3 Ph, 208-230/460 Volt, 215TC frame CM7174T 1ea. N095, ML100-1 ML100-138 3 Ph, 575 Volt, 215 TC frame CN7174T-5 DLF150 C-Face Mount 215TC to 256TC 15- 20 HP w/ 5210 Frame Adapter 15 HP 3 Ph, 208-230/460 Volt, 254TC frame CM7053T 1ea. N095, ML100-1 ML100-158 ZV200-1.25 3 Ph, 575 Volt, 254 TC frame CM7053T-5 20 HP 3 Ph, 208-230/460 Volt, 256TC frame CM7059T 3 Ph, 575 Volt, 256TC frame CM7059T-5 Notes for DS/DL Model: DS & DL pumps (excluding the DLF) are identical except for the frame (motor to pump mounting bracket). No Mounting base plate required, bracket is drilled to mount directly to the pad. Motor mounting bolts & lock washers are not included. DS model : Requires 4- 3/8” # 16 bolts, 1” long - grade 5. D model: Requires 4-1/2” # 13 bolts, 1-1/4” long - grade 5. OAL of DS pump assembly (no motor) : 12-11/16”. OAL of DL pump assembly (no motor) 14-3/32”. All Motors have a service factor of 1.15. CM motors have a rigid base, VM motors have no base (base not required as the pump bracket is used for mounting).
RkJQdWJsaXNoZXIy NDE1MjE4